The first picture is the old cpu cooler that i had.. But i bought a new one..
I bought some Noisekiller from Noise Control and used it on both side, top, bottom, front and back.
|
In the front i have drilled some holes so the 120mm fan gets a little more air, I also cut a hole for the switch
to my Biossavior. As you can se on the new pictue i have remove my biossavior, coz.. I have a new motherboard.. :)
|
This is my new front.. as you can see there is a new fan and blowhole and a LCD display.. The LCD display can show information
about many things in the computer.. How hot you cpu is and what OS you are using,
which user there is log on.. (Click on the picture Display)
And it can show visual bars when you use Winamp or Media Player (click on the picture Winamp)
|
I have now sanded the side's and the top, then i can start using the primer on my case.
The red dot on this picture is my dvd. I decided to cover my dvd..
|
As you can see i have painted the front with primer and now i got a problem.. I was just kick out of the place where i was painting
so now i have to look for an other place where i can do my painting..
|
Now i have found a place where i could do the last painting.. So now i'm back.. On these picture i have painted the drive cover's and
the front black.. and i have painted the side and top with a black primer.. coz i didn't have more left of the grey primer..
|
On these picture the black paint and black primer as been dry for about 4 hours.. So now i have to wait about 24 hours so that
the paint can dry.. Now i just have to wait, so i can see if i have done the painting correctly.. Just look at what i have painted,
but i have to paint the drive cover, the 2 sides and top again.. Some how the was some kind of ribbels in the paint.. :(
After that comes the hard part...
|
As you can see i have started to paint Bart Simpsons.. It looks good.. But to all you guys out there remeber to check that you have
but the template the correct way.. Coz' i didn't so i have to paint the side black again and start over.. :( If you look at the
new picture of bart you can see that there is some sort of bumps in the paint.. So now i have sanded the side again and have to start
all over again... :(((((((
|
As you can see i have now started over to paint Bart Simpsons.. If you closly to the picture the paint has
ran under the line of the template.. But when i'm don i will go over the painting with a brush.. I have now started
painting the paint that run under the line of the template, Now i have finish paiting the black line's so now i have
i'm finish.. :)
|
|
I have finnsih the side where my window is gonna be and the front I'm not sure that i will change the leds.. The top is also finnish
I think that i'm gonna but a window in the top, but i'm not sure yet...
|
This is my desk with my 2 new TFT screen.. The Left one is a Dell 18" and the rigth one is an Acer 17"
|
